RADIO CONTROLS
Teletaster® - Receiver
Our receiver series covers a wide range of applications: from the flexibly usable mini receiver up to the highly specialised control system. Accessories, for example to improve range, are also included in the series.
Receiver EKX1M, EKX4M
Mini receiver with one coding switch, switchable from impulse to switching function
EKX1M
EKX4M
1 channel
1 NO switch
4 channels
1 changeover
Dimensions
82 x 45 x 20 mm
Application
Receiver for implementation of one or four switching commands
Coding
The coding switch is located in the housing
Voltage
12-24 V AC/DC
Housing
Plastic housing, grey
Installation
Terminals in housing
Receiver EKX1MD, EKX4MD
Midi receiver with one coding switch, switchable from impulse to switching function
EKX1MD
EKX4MD
1 channel
4 channels
1 changeover
2 changeovers
2 NO switches
Dimensions
80 x 120 x 57 mm
Application
Receiver for implementation of one or four switching commands
Coding
Coding takes place using a coding switch in the device
Voltage
230VAC, 24V AC/DC of 12 V AC/DC
Housing
Plastic housing, grey
Installation
Terminals in housing
Ontvangers EKX1, EKX2, EKX3, EKX4
Midi receiver with one coding switch, switchable from impulse to switching function
EKX1
EKX2
EKX3
EKX4
1 channel
1 changeover
2 channels
2 changeovers
3 channels
3 changeovers
4 channels
4 changeovers
Dimensions
175 x 175 x 75 mm
Application
Receiver for implementation of one or four switching commands
Coding
Coding takes place using a coding switch in the device
Voltage
230VAC, 24V AC/DC of 12 V AC/DC
Housing
Plastic housing grey
Installation
Terminals in housing
Ontvanger EKX1ST
Plug enclosure self-learning receiver, radio retrofitting with existing drives
EKX1ST
1 channel
1 NO switch
Dimensions
120 x 65 x 40 mm
Application
Receiver with floating relay output, installation-ready for retrofitting
Coding
Coding is taught in by the receiver
Voltage
230 V AC
Housing
Plastic housing grey
Installation
Plug into existing power socket
Receiver EKX1ECA, EKX1EDA, EKX4EDA, EKX1ETA, EKX4ETA
1-4 channel compact receiver with one coding switch
EKX1ECA
EKX1EDA
EKX4EDA
1 channel
1 NO switch
12 V AC/DC
1 channel
1 NO switch
24 V AC/DC
4 channels
1 changeover
3 NO switches
24 V AC/DC
EKX1ETA
EKX4ETA
1 channel
1 NO switch
230 V AC
4 channels
1 changeover
3 NO switches
230 V AC
Dimensions
65,5 x 38,5 x 89,5 mm
Application
Receiver for implementation of one or four switching commands
Coding
Coding takes place using a coding switch
Housing
Plastic housing, grey
Installation
Power socket (pluggable) for 11-pole bullet plug for control cabinets
Ontvanger EKX1BE
Single-channel receiver circuit board with one coding switch
EKX1BE
1
channel
Dimensions
90 x 36 x 2 mm
Application
Receiver for implementing one switching command
Coding
Coding takes place using a coding switch
Voltage
8 V DC
Housing
-
Installation
Pluggable for example on motor control system as OEM implementation
Wir verwenden Cookies, um die Nutzung unserer Website zu analysieren und die Funktionalität zu verbessern.
Durch die Nutzung unserer Website (über jedes Gerät) stimmen Sie unseren Datenschutz- und Cookie-Richtlinien zu. Lesen Sie mehr >